White Knight^® Prep Rite Acrylic Primer Undercoat

How To Apply

How to apply:

Preparation

• Ensure the surface is clean, dry and free from grease, oil, dirt, rust scale, wax, mildew and other contaminants.
• Remove all loose and flaking paint.
• Thoroughly sand glossy and enamel surfaces.
• Fill nail holes and cracks with appropriate filler and sand smooth.
• Treat any mould with suitable anti mould solution.

Application

• Stir thoroughly with a broad flat stirrer in a circular lifting motion for at least 5 minutes before use and continue to stir at regular intervals during application.
• Apply 1 coat by brush or roller. Work well into cracks and crevices.
• A second coat may be required on very porous and tannin satin rich timber.

Do not use when air or surface temperature is below 10°C or above 30°C or in excessive humidity.

Coverage

• Approximately 14m² per litre, depending on the nature of the surface.

Drying

• Touch dry in 30 minutes. Re-coat after 2 hours. Drying will be slower in cold or humid conditions, in the absence of ventilation or where heavy film builds are applied.

Clean Up

• Clean brushes with water immediately after use.

Safety & First aid

• KEEP OUT OF REACH OF CHILDREN.
• This product is highly flammable. Store and use away from heat and eliminate any source of ignition.
• If swallowed, seek medical advice immediately and show the container or label. Do not induce vomiting.
• If in eyes, immediately flush with running water for at least 15 minutes. Seek immediate medical attention.
• Avoid breathing vapour or mist.
• Use only with adequate ventilation.
• If on skin, remove contaminated clothing. Wash skin thoroughly with soap and water.

For 24 hour medical emergency response service in Australia call 1800 883 254 and in New Zealand call 0800 000 096

Environment

• Do not pour unwanted paint down the drain.
• Keep unwanted paint in sealed containers for disposal via special chemical waste collections.
• Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle steel containers via can recycling programs.
• Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.