Warranties and Disclaimers

White Knight Rust Guard® Epoxy Enamel 5 Year Guarantee Conditions

White Knight Rust Guard® Epoxy Enamel is guaranteed to prohibit the development of rust for 5 years if applied to suitable and properly prepared surfaces, following White Knight instructions and the appropriate White Knight Preparation and Primer products are used. This guarantee is given by PPG Industries Australia Pty Ltd and applies to defects in the manufacture or formulation of the product. This guarantee does not cover: blistering, peeling or flaking; application in highly corrosive areas; paint failure caused by any breakdown of coatings applied previously or use of other coating not specified by White Knight; or any other factors beyond our control. Any damage to the coating must be repaired immediately to inhibit rust development. If this guarantee is not met, we will replace the paint or refund your money. We are not liable for the cost of any labour or any other direct or indirect loss or damage arising from a breach of this guarantee. Customers are responsible for all costs of claiming under this guarantee. To claim, customers must either email us at info@whiteknightpaints.com.au, Mail us at PO Box 204, Chester Hill, NSW 2162 or call our customer care number 131 686 to request a claim form. The benefits provided by this guarantee are in addition to other rights and remedies under the law.

If you are a consumer within the meaning of the Australian Consumer Law: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

 

White Knight Rust Guard® Quick Dry Advanced Enamel 8 Year Guarantee conditions

White Knight Rust Guard® Quick Dry Advanced Enamel is guaranteed to inhibit the development of rust for 8 years if applied to suitable and properly prepared surfaces, following White Knight instructions and the appropriate White Knight Preparation and Primer products are used (if required). This guarantee is given by PPG Industries Australia Pty Ltd and applies to defects in the manufacture or formulation of the product. This guarantee does not cover: blistering, peeling or flaking; application in highly corrosive areas; paint failure caused by any breakdown of coatings applied previously or use of other coating not specified by White Knight; or any other factors beyond our control. Any damage to the coating must be repaired immediately to inhibit rust development. If this guarantee is not met, we will replace the paint or refund your money. We are not liable for the cost of any labour or any other direct or indirect loss or damage arising from a breach of this guarantee. Customers are responsible for all costs of claiming under this guarantee. To claim, customers must either email us at info@whiteknightpaints.com.au, Mail us at PO Box 204, Chester Hill, NSW 2162 or call our customer care number 131 686 to request a claim form. The benefits provided by this guarantee are in addition to other rights and remedies under the law.

If you are a consumer within the meaning of the Australian Consumer Law:  Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

 

White Knight Website & Blog Terms of Use 

Your use of the website & blog content is governed by these Terms of Use.  The website & blog content is made available by PPG Industries Australia Pty Ltd, the owner and distributor of the "WHITE KNIGHT" brand of products (White Knight, we, us).  

Acceptance of Terms of Use

By using, or uploading content to the blog you agree to be bound by these Terms of Use as they exist at that time.  If you do not agree with these Terms of Use (including any amendments to these terms) you must immediately cease using the Blog.

We reserve the right to amend these Terms of Use at any time or for any reason.  Your continued access to and use of the Blog constitutes your acceptance of any revisions or changes to these Terms of Use.

Copyright and IP

White Knight owns or licenses all of the intellectual property rights in the materials, information and content that White Knight makes available through the Blog, including without limitation the text, graphics, video and audio clips, and the layout of the Blog (White Knight Content).  The White Knight Content is protected by copyright laws in Australia and overseas.

You may access, download and use the White Knight Content for your own personal purposes on a temporary basis only and for the sole purpose of viewing such information.  You must not publish, adapt, communicate to the public ,    or make any other copy of any other part of the White Knight Content without our prior consent. You may post our content on social media provided you attribute it to us.

Content uploaded by Blog users

You retain ownership of any materials, photographs, works and information that you upload to the Blog (User Content).  You grant White Knight a non-exclusive, perpetual, irrevocable, world-wide, royalty-free licence to use and modify the User Content for White Knight's business purposes and for marketing and promotional purposes (including the right to sub-license others to use the User Content for such purposes).

You acknowledge that User Content will be available to be viewed by the public over the internet.  White Knight is not responsible to you for any copying or misuse of your User Content by any members of the public.

You must not modify, copy, adapt, publish, reproduce or distribute any content uploaded by another user of the Blog unless you have first obtained that person's consent to do so.

If you upload User Content to the Blog, you warrant that:

(a) you are the owner or authorised user of the User Content and that use of the User Content by White Knight as permitted by the Terms of Use will not infringe the intellectual property rights of any person (including without limitation, any copyright, moral rights or trade marks);

(b)  you will not upload User Content which breaches any law, which infringes any third party rights, which is defamatory, discriminatory, obscene, offensive, misleading, deceptive, inflammatory or which is threatening, abusive or invasive of another person's privacy;

(c) the User Content is based on your genuine experience with a White Knight product and does not reference (directly or indirectly) the products of any competitor of White Knight; and

(d) any person featured in any footage or photograph has consented (or in the case of a person aged under 18, that parent or guardian consent has been obtained) to the footage or photograph being uploaded to the Blog and used by White Knight in accordance with these Terms of Use.

You must comply with any additional directions, standards or guidelines for User Content that White Knight may publish from time to time.

User Content represents the individual opinion of the author.  White Knight does not endorse (or accept any liability for) any opinion or statement made by any other person via the Blog.

Access to Blog

In order upload User Content, you may need to register as a member and create a user name and password.  You must log in using your user name and password to access certain features of the Blog.

You must maintain the confidentiality of your password and you are responsible for all activities that are conducted through your account whether or not you have authorised such use.

Your account and your right to use the Blog are personal to you and you must not authorise others to use your account. 

You must contact us immediately if you believe someone has gained unauthorised access to your account.  You are solely responsible for providing (at your cost) all equipment, software and internet access necessary to use the Blog.

Misuse of Blog

You agree to only use the Blog in accordance with these Terms of Use and applicable laws.

Your failure to comply with these Terms of Use may result in the suspension or termination of your right to upload further User Content to the Blog, without notice.

If you think any content or material on the Blog is inappropriate, inaccurate, out of date, unlawful or infringes your rights, please let us know.

Privacy

Any personal information collected by White Knight through your use of the Blog will be dealt with in accordance with our Privacy Policy available at: http://www.whiteknightpaints.com.au/privacy-policy

Termination or suspension of Blog

White Knight has the right to terminate or suspend the operation of the Blog for any reason without notice and without liability. 

Monitoring

White Knight reserves the rights to review, edit, move or delete any content or material  (including User Content) displayed on or through the Blog at any time without notice and without liability.

You acknowledge that White Knight has no obligation to monitor your use of the Blog, but it has the right to do so at any time for its own business purposes, including as required to determine your compliance with these Terms of Use or to comply with any law or government authority request.

Liability

To the maximum extent permitted by law, White Knight (and its directors, officers, employees and agents) excludes all liability for any loss or damage (including, without limitation, direct, indirect, special or consequential loss, loss of profits, loss of data or loss of opportunity) which you suffer whether arising under contract, tort (including negligence), equity, statute or any other cause of action, or otherwise as a result of using the Blog or any content, information or service available on or from the Blog. 

White Knight Content on the Blog relating to paint choice, application and general tips, coverage, product and technical information is provided as a general guide only.  The accuracy of such information may be affected by a number of factors including application technique, surface quality and temperature. 

While we use reasonable commercial endeavours to ensure the accuracy and completeness of the White Knight Content, inaccuracies may occur. White Knight does not provide any warranty in relation to your use of the Blog or as to the currency, completeness or accuracy of the White Knight Content. Your use of the Blog is at your own risk and the White Knight Content is provided to you "as is".

In respect of any conditions, warrantees or guarantees which cannot be excluded under statue, to the extent permitted by law, the liability of White Knight is limited (at its option) to the replacement, repair or resupply of the relevant goods or the resupply or refund of the cost of relevant services.

General terms

Any failure by White Knight to enforce strict performance of any of these Terms of Use will not be construed as a waiver of any right or remedy of White Knight in respect of any existing or subsequent breach of these Terms of Use.

If any provision of these Terms of Use is found to be invalid or unenforceable, the provision will be deemed severed from these Terms of Use and the remainder of the terms will continue in full force and effect.

These Terms of Use will be governed by and construed in accordance with the laws in force in Victoria, Australia, and you unconditionally submit to the non-exclusive jurisdiction of the courts having jurisdiction there.

Although Australian websites may be accessed outside of Australia, we make no representation that the content of the Blog complies with the laws of any other country. If you access the Blog from outside Australia, you are solely responsible for ensuring compliance with your local laws and for any reliance on the Blog.